Divido Panel

DIVIDO panel is a non-loadbearing partitioning system, bi block, made of modules with wood panels mounted on the basic structure made from stainless steel. The wooden panels are fixed to the structure by means of hooks mounted on back of the panel. The panels are made of PAL or MDF panels with E1 emissivity class and are covered in melamine foil or HPL, with various essences of wood veneer, with metal, fabrics, wallpaper or painted in RAL colors.

The basic structure is made of galvanized steel sheet profiles, processed by cold plastic deformation. The pillars of the basic structure are provided with an telescopic adjustment on height. The panels fixing is hidden, without visible profiles on the front panels. Between the panels is a gap of 6 mm, respectively between the panels and the other elements of the system. The sound insulation up to 48 dB is obtained by using a system of gaskets mounted on the basic structure and by using bio soluble mineral wool, combustibility class A1, as stuffing material between the panels.

The basic structure allows the installation of cables and electrical installations inside the wall. The assembly time is reduced due to the prefabricated panels and basic structure specially designed. The disassembly of the panels is done without the need of special tools or devices, by simply lifting the panel by 5 mm. DIVIDO panel is a partitioning wall that can be relocated and that can be demounted and relocated with minimal loss if the sizes of the new location are within the tolerance limit of the system. The profile for the ceiling and floor fixing allows the taking over of the dimensional and execution tolerances as well as of the building movement. The DIVIDO panel system may be combined with doors, connection elements and components of all TECHO partitioning walls.

Main frame structure is composed of steel profiles processed by plastic deformation, bending, rolling and welding. Profiles are galvanized steel.

Wall construction is sandwich type and consists of panels fixed together with hooks. Space between the two panes is filled with mineral wool. The panels are attached to the main frame system with hooks made from galvanized steel. The panels used are: chipboard: 18/19 mm thick Class E1/B2 or veneered chipboard 19 mm.

For a better fit and better control, use rubber gaskets or combination of rubber and plastics (gaskets co-extruded). The rubber gaskets isolate connections between floor and ceiling, between panels and mullions, and between panels and transoms. For fixing panels on the structure are used special galvanized steel hooks. The hooks are attached on the back of chipboard with special screws. After fixing the hooks on the back panels, they are ready to be hung from the supporting structure consisting of main frame system.

Storage wall offers more than the demarcation function of a space. As you can see from the picture above this wall system has a variety of storage and organization solutions. All accessories are very useful in organizing space formed by the walls. All components are easy to install and dismantle. No special tools are required. On the top line of the partition or in the spaces between the modules can be installed hooks. So with the hook and a nylon thread you can hang a picture or a wall painting wall without holes or warp. Hooks are used for weights up to 3 kg.

Easy to assemble and dismantle.
Easy to intervene for repairs and additions to the system.
Pillars of the structure, of main frames, are drilled and large perforations were made at a step of 256 mm to allow the fixing of the hooks and the passage for the electrical cable channels.
Perforations for the cables are 26 x 50mm for permitting the electrical wiring and other installations to pass.

Office spaces.
Rooms and industrial space.
Training rooms and spaces for education.

• Construction type
  Double glazed
• Mounting visible profile – sizes
  Height: Panel – 15 – 22mm
  Thickness: 100mm
• Door frame width
  100mm for the 33760 frame
• Maximum height of the glass wall
  3000mm
• Width of the glass modules
  300 – 1300mm
• Average weight
  25-35kg/mp
• Types of joints between glass panels
  Sup/Inf. Profiles made of Anodized Aluminum and Stainless steel mullions on which the panels are fixed with Aluminum hooks
• Types or panels
  Blind panels made of Wood/Metal/Composite materials/Sound-absorbing panels made of wood or textiles
• Panel finishes
  EGGER ZOOM RADAUTI melamine Chipboard – E1 emissivity class, combustibility B2 or upon request B1, Chipboard with wood veneer, Laminated Chipboard with HPL of 0.8 mm, MDF lacquered in RAL colors, Steel /aluminum sheet painted in electrostatic field, Composite material: aluminum composite, Corian, etc. Soundproofing panels with Wooden or Textile finish, PA
• Panel thickness
  18 – 22mm
• Types of frames
  Aluminum frame
  Wooden frame
• Glass doors thickness
  8mm, 10mm
• Wooden doors thickness
  41mm, 55mm
• Double glazed glass doors thickness
  41mm, 55mm, 100mm
• Tolerance – on height
  +/- 8mm
• Tolerance – on lateral
  +/- 3mm
• Sound insulation
  Chipboard 18 – Chipboard 18 mm – 40 dB
  Chipboard 18mm – 64MW – 18mm – 48 dB